How to Charge Car Battery with Home Electricity

Ever found your car’s battery dead and you got no idea how that happened? Yes, this may happen sometimes. For situations like this, you should know if there are hacks or easy ways, how to charge car battery with home electricity. 

Think about getting ready for an outing one day and finding your car battery totally dead! What could possibly be the reason? There are multiple probabilities- you might have left the headlights on, or you kept the car for idling for a long period, or you drove it less the amount of time you need to keep it safe. The worst case scenario is that you might need a battery replacement. Whatever the reason might be, the escape plan is what I’m going to share with you now.

Methods of Charging Your Car Battery with Home Electricity

There’s only two proven method to charge the car battery with the power supply of your house. A car battery charger uses home electricity to recharge the battery cells. Alternatively, you can use your home inverter to charge the battery cells. Both of these operate with the home electricity.

Method-A. Using a Car Battery Charger

You should buy a good quality car charger for your car’s battery type. Pretty much all types of car batteries are compatible with these chargers except for the gel type battery cells. However, modern car battery chargers are equipped with high-end technologies. They’ll charge up the discharged batteries without you needing to d any hassle.

01. Preparing to charge the car battery

At first, you need to wear your safety gears. Working with power supply units might not be the most difficult task, but unexpected situations could occur.

    a. Wear electricity-repellant gloves.

    b. Make sure you aren’t standing on a wet surface, and your hands and feet are dry and clean.

    c. Read the charger’s user manual properly before proceeding to connect the wires.

02. Removing the battery

Now, you need to remove the battery from your car.

  • Pop the hood of the car open.
  • Disconnect the batteries negative wire (the black one) first.
  • Then remove the red or positive wire.
  • Keep the battery on a dry surface.
  • Wipe the battery with a wet cloth with baking soda, or just rub it with sandpaper to remove the grime from the surface. The dirt buildup on batteries has impact on the power absorbance of the batteries.

03. Setting up the charger to battery connection

It’s time to recharge the battery.

  • Keep the car charger disconnected from the power outlet of your house.
  • With the help of a connector, connect the black (negative/ground) wire to the black (negative/ground) port of the charger.
  • Connect the red (positive) wire to the red port.
  • Never touch the wire ends with bare hands; there might be things that shorten the wires and start conducting electricity. A fire might also be caught!
  • Now, carefully connect the charger to the power outlet.
  • The connection is set up!

04. Finishing up

The battery is in charging phase now. Most modern car battery chargers have indicators that give you an alarm when the battery is full. It may take a charger to charge the car battery 3 hours to 12 or more depending on the capacity of your battery and the voltage supply of your power supply.

Most car chargers will recharge your car’s battery within a period of 12 hours. Therefore, you can leave it overnight for charging. The charger will turn off charging once the battery is full. Sp, you can sleep peacefully at night, and get your car all-ready to be driven in the morning.

Method-B. Using a Home Inverter

Using your home inverter to charge the car battery will take less time than the charger method. You shouldn’t use this method frequently, but it’s a simple and easy method to apply once in a while.

01. Setting up the connection

The connection setup is the same as the car charger.

  • The inverter shouldn’t be connected to the power supply before you set up all the connections.
  • Connect the ground/negative port of the battery to the black wire of the output port of the inverter.
  • The positive wire has to go to the red port of the output’s positive port.

02. Supplying power

Home inverters use the direct power from the power outlets of your house.

  • Check the connections again before you turn the power supply on.
  • If the connections are alright, plug the inverter into the power outlet.
  • Connecting the wires in the wrong manner may make the battery explode.

03. Finishing up

Home inverters have a high power supply. It might take as low as 1.5 hours for an inverter to charge the battery completely. Some might take up to 3 hours.

It’s an easy method for fast charging. If you don’t have enough time to wait overnight for a ride, the inverter method would be a great option.

Safety tips for battery’s good health

The battery cells get sufficient power from the alternator while you drive your car. If you follow certain rules, the battery of your car might never need to be charged separately. The gist of all these is to prevent the battery from losing charge. Let’s see how we can do that.

  • Driving the car regularly will make the alternator supply enough charge to the battery.
  • When you park your car, make sure the headlights are off, the radio too. Turn off all the other devices that operate with the battery’s power.
  • If you don’t plan to drive the car regularly, then drive it once a week for 7 to 8 hours to keep the battery’s voltage level steady.

Verdict

That’s all about how one can charge up their car batteries with home electricity supply. If you don’t want to do any of these, kindly go through the safety tips and make sure your car’s battery can never go dead!

The methods I described here are simple and trouble-free. Be careful while connecting the wires and you’re all set to relax. You don’t need to go to a mechanic too if you simply follow these methods.

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

Scroll Up